LOCATION
Download File

 

TECHNICAL SHEET

DST-Seibu Giken

CONSORB DC-50R Dehumidifier

REF : CONSORB DC-50R

Medium dehumidifier with two fans

  • Dehumidification capacity up to 3 kg/h
  • Dry air flow rate at 550 m3/h
  • Stainless steel bodywork
  • Self-regulating battery
REQUEST A FREE QUOTE

DESCRIPTION

Dehumidification principle

Moist air is absorbed by the dehumidifier, passing through a silica gel wheel to absorb moisture from the incoming air before exiting dry in the desired humidity level. A pump coupled with a resistor continuously blows on the wheel to extract the absorbed moisture vapor before being discharged to the outside through a duct. Another air intake duct provides the dehumidifier's internal pressure.

    Utility

    The DC-50 has a heating element with a 3-phase power supply. This unit is the right choice when you need to recirculate air in a room and there is a large difference between the humidity content of the air in a room and the outside air. Optionally, it is possible to control the capacity with a 0-10Vdc signal, for example from the EH3 controller.

    Performances!

    All-stainless steel housing, type 2333
    • Patented silica gel impeller (manufactured by DST's Japanese subsidiary):
      • Washable in case of contamination,
      • No dust transferred during operation
      • Minimum lifespan of 10 years(up to 15 years!)with proper maintenance,thenyou can just change the impeller and the device will continue to function properly!
      • Impeller is non-flammable in the event of a power failure (due to heat from the heating element)
      • Absorption Highly efficient humidity control is long-lasting!
    • Low energy consumption.
    • Professional regulating humidistat.

        SIMILAR PRODUCTS